About Us | Contact

Nitrous Direct Electronics

Digital Progressive Controller

This unit was designed to allow the aggressive use of nitrous power and putting it on the ground. A simplified wiring harness and easy to adjust push button LED controls makes this device a breeze to install and use. The start percentage can be adjusted from 1% to 100% in 1% increments. The Nitrous build time can be adjusted from 0.0tenths (instant 100%) to 8.0 seconds in 0.1 tenths of a second increments. It also has 2 modes for automatic cut off or continue the count down. It is activated by your WOT switch or your push button switch that activates your nitrous kit. The high amperage drivers can handle all of today's high amperage solenoids. In fact, this controller is so heavy duty it can control 4 large PRO solenoids used on a V8 FOGGER KIT!!! Overall dimensions are 4'x3'x 1.75'. Shop around and you will find that this is the best deal on the market today! This device is perfect for your nitrous installation and is a must have if you are running shots over 50HP for your engine's safety and longevity. The "hit" of nitrous is what damages components and what has given Nitrous a bad name, but with this heavy duty digital controller you won't have to worry about any of that.


Digital Two Stage Timer

Digital 2-stage Delay Timer. Control 2 stages of nitrous with this simple all digital control box.


EGT Safety Switch

Finally, a safe effective way to prevent engine damage without sacrificing performance. The EGT Switch can turn off the nitrous kit, turn on a step retard to your ignition box, activate a fuel enrichment, dump boost with a wastegate, or simply turn off or on any accessory when limits are set properly.


Bottle Heater

Bottle heater for 10 or 15lb bottle has to velcros straps and wraps around your bottle, you will need some wire and a toggle and will be all set to get constant bottle pressure and performance


Fully Auto Bottle Heater Kit!

This is the kit everyone has been raving about. Fully automatic is has a bottle pressure switch that monitors your bottle pressure. When it drops below the ideal pressure it turns the heater on, and if it climbs too high it turns it off, keeping your bottle at that perfect temp and pressure for a solid nitrous hit every time. Comes complete with wiring and everything you need to install! Fits 10 or 15lb bottles